You are here: Lanemark > Process Burner Division
|
|
||||
Lanemark's Process Burner Division designs and manufactures two forms of gas fired process heating equipment plant. The first is a high efficiency gas fired small bore heating system which is typically used for the controlled heating of water, metal finishing solutions, waxes, oils, detergents etc. The second is a Forced Draught Cone burner and associated controls for use in drying booths, ovens, paint booths, curing or finishing of metals, textiles, rubber
|
|
|
TANK HEATERS |
|
|
TX Series |
Lanemark TX series high efficiency, small diameter immersion tube tank heating systems offer end users the most cost effective method of heating process liquids which are used in many areas of industry. |
|
TRX Series |
Lanemark TRX series packaged, high efficiency, small diameter immersion tube tank heating systems meet the needs of industrial process tanks which have heat input requirements of up to 45 kW (150,000 Btu/h). Built to the same exacting standards as the larger capacity TX modular tank heating burner systems, the TRX burner incorporates burner, gas train and control system and is packaged to simplify/minimise plant installation work. |
|
DIRECT FIRED OVEN BURNERS |
|
|
FD-E Burners |
Lanemark FD-E series packaged burners are designed to offer low cost, high turn-down (gas only) control for process air heating applications in convection ovens and dryers. |
|
FD-C Burners |
Lanemark FD-C series packaged burners are specifically designed to offer flexible, high turn-down (gas only) control for process air heating applications in convection ovens and dryers. |
|
FD-E (GA) Burners |
Lanemark FD-E (GA) series packaged burners offer low cost, high turn-down (gas and air) control for process air heating applications in convection ovens, dryers and spray booths where maximum combustion efficiency and minimum emissions are of prime importance. |
|
FD-C (GA) Burners |
Lanemark FD-E (GA) series packaged burners offer low cost, high turn-down (gas and air) control for process air heating applications in convection ovens, dryers and spray booths where maximum combustion efficiency and minimum emissions are of prime importance. |
|
|
|
INDIRECT PROCESS HEATERS |
|
|
Copyright Lanemark 2001. For more information, contact us, or email info@lanemark.com