Featuring Lanemark’s highly innovative ‘Air Pressure Lead’ (APL) technology, all FDGA series burners offer an excellent combination of combustion efficiency and emissions control.

The compact design can be readily installed in a wide range of oven and dryer facilities and reflects Lanemark’s commitment to build quality, performance and economic operation.

Air Pressure Lead (APL) technology – gas and combustion air modulating control
Heat input range – 60 kW to 2,100 kW
Ideal for variable plant operating conditions
Choice of operating fuels

Based on the proven FDC design, FDGA burners utilise Lanemark’s APL technology. Variable combustion air fan speed control combined with modulating mono-bloc gas valve technology ensures that safe and efficient gas/air ratios are maintained even under changeable plant operating conditions. Units offer a choice of operation on either natural gas or propane and are particularly suitable for direct fired operations.

Download the FDGA Burner data sheet here.

ModelGas ConnectionHeat Input Range
FD5GA1”9 – 220 kW
FD10GA 1”13 – 352 kW
FD10GA 1½”13 – 440 kW
FD15GA 1½”18 – 660 kW
FD20GA 2”25 – 880 kW
FD25GA 2”45 – 1150 kW
FD30GA 2”45 – 1550 kW
FD35GA2”45 – 2100 kW

Each FDGA packaged burner includes:

a) Burner windbox

b) Combustion air fan

c) Manual sliding air adjustment damper

d) Compact monoblock air/gas regulator valve train

e) Burner control panel (including combustion air fan speed controller)

Standard control items include a burner controller, ignition transformer and differential air pressure switch. Two 3-way air valves perform safety checks on the air pressure switch in both open and closed modes each time the burner fires, allowing the independent operation of the combustion air fan in conjunction with oven/dryer main recirculation fans.


FuelsNatural GasPropane
Control voltages230V110V
Combustion air fan electrical supplies230V/3ph/50Hz

(provided by internal combustion air fan speed controller)

Flame sensingFlame electrodeUV
Heat output control optionsModulating (gas & air)
External control signals4-20mA/0-10VDC3 Wire (230V110V/24V)

Product finishing

  • Pre-treatment dryers
  • Final treatment ovens for paint drying & curing
  • Conveyor and batch ovens

Textile and fabric dryers

Rotary moulding machines

Food processing

Powder and grain dryers

Lanemark FD burner system assemblies are tested prior to despatch and conform to relevant sections of either European Standard EN 746 Part 2 or the requirements of NFPA 86 for US applications.